From f1c485d4ef876d42c09f132adb7feccfb507081f Mon Sep 17 00:00:00 2001 From: Luca Guidi Date: Mon, 3 Nov 2008 10:07:05 +0100 Subject: [PATCH] Make sure of require forked memcache-client gem --- activesupport/lib/active_support/vendor.rb | 4 +- .../vendor/memcache-client-1.5.0/memcache.rb | 849 -------------------- .../vendor/memcache-client-1.5.1/memcache.rb | 849 ++++++++++++++++++++ activesupport/test/caching_test.rb | 6 + 4 files changed, 857 insertions(+), 851 deletions(-) delete mode 100644 activesupport/lib/active_support/vendor/memcache-client-1.5.0/memcache.rb create mode 100644 activesupport/lib/active_support/vendor/memcache-client-1.5.1/memcache.rb diff --git a/activesupport/lib/active_support/vendor.rb b/activesupport/lib/active_support/vendor.rb index 633eb2e..dc98936 100644 --- a/activesupport/lib/active_support/vendor.rb +++ b/activesupport/lib/active_support/vendor.rb @@ -14,9 +14,9 @@ rescue Gem::LoadError end begin - gem 'memcache-client', '~> 1.5.0' + gem 'memcache-client', '~> 1.5.1' rescue Gem::LoadError - $:.unshift "#{File.dirname(__FILE__)}/vendor/memcache-client-1.5.0" + $:.unshift "#{File.dirname(__FILE__)}/vendor/memcache-client-1.5.1" end begin diff --git a/activesupport/lib/active_support/vendor/memcache-client-1.5.0/memcache.rb b/activesupport/lib/active_support/vendor/memcache-client-1.5.0/memcache.rb deleted file mode 100644 index 3011320..0000000 --- a/activesupport/lib/active_support/vendor/memcache-client-1.5.0/memcache.rb +++ /dev/null @@ -1,849 +0,0 @@ -# All original code copyright 2005, 2006, 2007 Bob Cottrell, Eric Hodel, -# The Robot Co-op. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. Neither the names of the authors nor the names of their contributors -# may be used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS -# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE -# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, -# OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT -# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - -require 'socket' -require 'thread' -require 'timeout' -require 'rubygems' - -class String - - ## - # Uses the ITU-T polynomial in the CRC32 algorithm. - - def crc32_ITU_T - n = length - r = 0xFFFFFFFF - - n.times do |i| - r ^= self[i] - 8.times do - if (r & 1) != 0 then - r = (r>>1) ^ 0xEDB88320 - else - r >>= 1 - end - end - end - - r ^ 0xFFFFFFFF - end - -end - -## -# A Ruby client library for memcached. -# -# This is intended to provide access to basic memcached functionality. It -# does not attempt to be complete implementation of the entire API, but it is -# approaching a complete implementation. - -class MemCache - - ## - # The version of MemCache you are using. - - VERSION = '1.5.0' - - ## - # Default options for the cache object. - - DEFAULT_OPTIONS = { - :namespace => nil, - :readonly => false, - :multithread => false, - } - - ## - # Default memcached port. - - DEFAULT_PORT = 11211 - - ## - # Default memcached server weight. - - DEFAULT_WEIGHT = 1 - - ## - # The amount of time to wait for a response from a memcached server. If a - # response is not completed within this time, the connection to the server - # will be closed and an error will be raised. - - attr_accessor :request_timeout - - ## - # The namespace for this instance - - attr_reader :namespace - - ## - # The multithread setting for this instance - - attr_reader :multithread - - ## - # The servers this client talks to. Play at your own peril. - - attr_reader :servers - - ## - # Accepts a list of +servers+ and a list of +opts+. +servers+ may be - # omitted. See +servers=+ for acceptable server list arguments. - # - # Valid options for +opts+ are: - # - # [:namespace] Prepends this value to all keys added or retrieved. - # [:readonly] Raises an exception on cache writes when true. - # [:multithread] Wraps cache access in a Mutex for thread safety. - # - # Other options are ignored. - - def initialize(*args) - servers = [] - opts = {} - - case args.length - when 0 then # NOP - when 1 then - arg = args.shift - case arg - when Hash then opts = arg - when Array then servers = arg - when String then servers = [arg] - else raise ArgumentError, 'first argument must be Array, Hash or String' - end - when 2 then - servers, opts = args - else - raise ArgumentError, "wrong number of arguments (#{args.length} for 2)" - end - - opts = DEFAULT_OPTIONS.merge opts - @namespace = opts[:namespace] - @readonly = opts[:readonly] - @multithread = opts[:multithread] - @mutex = Mutex.new if @multithread - @buckets = [] - self.servers = servers - end - - ## - # Returns a string representation of the cache object. - - def inspect - "" % - [@servers.length, @buckets.length, @namespace, @readonly] - end - - ## - # Returns whether there is at least one active server for the object. - - def active? - not @servers.empty? - end - - ## - # Returns whether or not the cache object was created read only. - - def readonly? - @readonly - end - - ## - # Set the servers that the requests will be distributed between. Entries - # can be either strings of the form "hostname:port" or - # "hostname:port:weight" or MemCache::Server objects. - - def servers=(servers) - # Create the server objects. - @servers = servers.collect do |server| - case server - when String - host, port, weight = server.split ':', 3 - port ||= DEFAULT_PORT - weight ||= DEFAULT_WEIGHT - Server.new self, host, port, weight - when Server - if server.memcache.multithread != @multithread then - raise ArgumentError, "can't mix threaded and non-threaded servers" - end - server - else - raise TypeError, "cannot convert #{server.class} into MemCache::Server" - end - end - - # Create an array of server buckets for weight selection of servers. - @buckets = [] - @servers.each do |server| - server.weight.times { @buckets.push(server) } - end - end - - ## - # Decrements the value for +key+ by +amount+ and returns the new value. - # +key+ must already exist. If +key+ is not an integer, it is assumed to be - # 0. +key+ can not be decremented below 0. - - def decr(key, amount = 1) - server, cache_key = request_setup key - - if @multithread then - threadsafe_cache_decr server, cache_key, amount - else - cache_decr server, cache_key, amount - end - rescue TypeError, SocketError, SystemCallError, IOError => err - handle_error server, err - end - - ## - # Retrieves +key+ from memcache. If +raw+ is false, the value will be - # unmarshalled. - - def get(key, raw = false) - server, cache_key = request_setup key - - value = if @multithread then - threadsafe_cache_get server, cache_key - else - cache_get server, cache_key - end - - return nil if value.nil? - - value = Marshal.load value unless raw - - return value - rescue TypeError, SocketError, SystemCallError, IOError => err - handle_error server, err - end - - ## - # Retrieves multiple values from memcached in parallel, if possible. - # - # The memcached protocol supports the ability to retrieve multiple - # keys in a single request. Pass in an array of keys to this method - # and it will: - # - # 1. map the key to the appropriate memcached server - # 2. send a single request to each server that has one or more key values - # - # Returns a hash of values. - # - # cache["a"] = 1 - # cache["b"] = 2 - # cache.get_multi "a", "b" # => { "a" => 1, "b" => 2 } - - def get_multi(*keys) - raise MemCacheError, 'No active servers' unless active? - - keys.flatten! - key_count = keys.length - cache_keys = {} - server_keys = Hash.new { |h,k| h[k] = [] } - - # map keys to servers - keys.each do |key| - server, cache_key = request_setup key - cache_keys[cache_key] = key - server_keys[server] << cache_key - end - - results = {} - - server_keys.each do |server, keys_for_server| - keys_for_server = keys_for_server.join ' ' - values = if @multithread then - threadsafe_cache_get_multi server, keys_for_server - else - cache_get_multi server, keys_for_server - end - values.each do |key, value| - results[cache_keys[key]] = Marshal.load value - end - end - - return results - rescue TypeError, SocketError, SystemCallError, IOError => err - handle_error server, err - end - - ## - # Increments the value for +key+ by +amount+ and retruns the new value. - # +key+ must already exist. If +key+ is not an integer, it is assumed to be - # 0. - - def incr(key, amount = 1) - server, cache_key = request_setup key - - if @multithread then - threadsafe_cache_incr server, cache_key, amount - else - cache_incr server, cache_key, amount - end - rescue TypeError, SocketError, SystemCallError, IOError => err - handle_error server, err - end - - ## - # Add +key+ to the cache with value +value+ that expires in +expiry+ - # seconds. If +raw+ is true, +value+ will not be Marshalled. - # - # Warning: Readers should not call this method in the event of a cache miss; - # see MemCache#add. - - def set(key, value, expiry = 0, raw = false) - raise MemCacheError, "Update of readonly cache" if @readonly - server, cache_key = request_setup key - socket = server.socket - - value = Marshal.dump value unless raw - command = "set #{cache_key} 0 #{expiry} #{value.size}\r\n#{value}\r\n" - - begin - @mutex.lock if @multithread - socket.write command - result = socket.gets - raise_on_error_response! result - result - rescue SocketError, SystemCallError, IOError => err - server.close - raise MemCacheError, err.message - ensure - @mutex.unlock if @multithread - end - end - - ## - # Add +key+ to the cache with value +value+ that expires in +expiry+ - # seconds, but only if +key+ does not already exist in the cache. - # If +raw+ is true, +value+ will not be Marshalled. - # - # Readers should call this method in the event of a cache miss, not - # MemCache#set or MemCache#[]=. - - def add(key, value, expiry = 0, raw = false) - raise MemCacheError, "Update of readonly cache" if @readonly - server, cache_key = request_setup key - socket = server.socket - - value = Marshal.dump value unless raw - command = "add #{cache_key} 0 #{expiry} #{value.size}\r\n#{value}\r\n" - - begin - @mutex.lock if @multithread - socket.write command - result = socket.gets - raise_on_error_response! result - result - rescue SocketError, SystemCallError, IOError => err - server.close - raise MemCacheError, err.message - ensure - @mutex.unlock if @multithread - end - end - - ## - # Removes +key+ from the cache in +expiry+ seconds. - - def delete(key, expiry = 0) - @mutex.lock if @multithread - - raise MemCacheError, "No active servers" unless active? - cache_key = make_cache_key key - server = get_server_for_key cache_key - - sock = server.socket - raise MemCacheError, "No connection to server" if sock.nil? - - begin - sock.write "delete #{cache_key} #{expiry}\r\n" - result = sock.gets - raise_on_error_response! result - result - rescue SocketError, SystemCallError, IOError => err - server.close - raise MemCacheError, err.message - end - ensure - @mutex.unlock if @multithread - end - - ## - # Flush the cache from all memcache servers. - - def flush_all - raise MemCacheError, 'No active servers' unless active? - raise MemCacheError, "Update of readonly cache" if @readonly - begin - @mutex.lock if @multithread - @servers.each do |server| - begin - sock = server.socket - raise MemCacheError, "No connection to server" if sock.nil? - sock.write "flush_all\r\n" - result = sock.gets - raise_on_error_response! result - result - rescue SocketError, SystemCallError, IOError => err - server.close - raise MemCacheError, err.message - end - end - ensure - @mutex.unlock if @multithread - end - end - - ## - # Reset the connection to all memcache servers. This should be called if - # there is a problem with a cache lookup that might have left the connection - # in a corrupted state. - - def reset - @servers.each { |server| server.close } - end - - ## - # Returns statistics for each memcached server. An explanation of the - # statistics can be found in the memcached docs: - # - # http://code.sixapart.com/svn/memcached/trunk/server/doc/protocol.txt - # - # Example: - # - # >> pp CACHE.stats - # {"localhost:11211"=> - # {"bytes"=>4718, - # "pid"=>20188, - # "connection_structures"=>4, - # "time"=>1162278121, - # "pointer_size"=>32, - # "limit_maxbytes"=>67108864, - # "cmd_get"=>14532, - # "version"=>"1.2.0", - # "bytes_written"=>432583, - # "cmd_set"=>32, - # "get_misses"=>0, - # "total_connections"=>19, - # "curr_connections"=>3, - # "curr_items"=>4, - # "uptime"=>1557, - # "get_hits"=>14532, - # "total_items"=>32, - # "rusage_system"=>0.313952, - # "rusage_user"=>0.119981, - # "bytes_read"=>190619}} - # => nil - - def stats - raise MemCacheError, "No active servers" unless active? - server_stats = {} - - @servers.each do |server| - sock = server.socket - raise MemCacheError, "No connection to server" if sock.nil? - - value = nil - begin - sock.write "stats\r\n" - stats = {} - while line = sock.gets do - raise_on_error_response! line - break if line == "END\r\n" - if line =~ /\ASTAT ([\w]+) ([\w\.\:]+)/ then - name, value = $1, $2 - stats[name] = case name - when 'version' - value - when 'rusage_user', 'rusage_system' then - seconds, microseconds = value.split(/:/, 2) - microseconds ||= 0 - Float(seconds) + (Float(microseconds) / 1_000_000) - else - if value =~ /\A\d+\Z/ then - value.to_i - else - value - end - end - end - end - server_stats["#{server.host}:#{server.port}"] = stats - rescue SocketError, SystemCallError, IOError => err - server.close - raise MemCacheError, err.message - end - end - - server_stats - end - - ## - # Shortcut to get a value from the cache. - - alias [] get - - ## - # Shortcut to save a value in the cache. This method does not set an - # expiration on the entry. Use set to specify an explicit expiry. - - def []=(key, value) - set key, value - end - - protected - - ## - # Create a key for the cache, incorporating the namespace qualifier if - # requested. - - def make_cache_key(key) - if namespace.nil? then - key - else - "#{@namespace}:#{key}" - end - end - - ## - # Pick a server to handle the request based on a hash of the key. - - def get_server_for_key(key) - raise ArgumentError, "illegal character in key #{key.inspect}" if - key =~ /\s/ - raise ArgumentError, "key too long #{key.inspect}" if key.length > 250 - raise MemCacheError, "No servers available" if @servers.empty? - return @servers.first if @servers.length == 1 - - hkey = hash_for key - - 20.times do |try| - server = @buckets[hkey % @buckets.nitems] - return server if server.alive? - hkey += hash_for "#{try}#{key}" - end - - raise MemCacheError, "No servers available" - end - - ## - # Returns an interoperable hash value for +key+. (I think, docs are - # sketchy for down servers). - - def hash_for(key) - (key.crc32_ITU_T >> 16) & 0x7fff - end - - ## - # Performs a raw decr for +cache_key+ from +server+. Returns nil if not - # found. - - def cache_decr(server, cache_key, amount) - socket = server.socket - socket.write "decr #{cache_key} #{amount}\r\n" - text = socket.gets - raise_on_error_response! text - return nil if text == "NOT_FOUND\r\n" - return text.to_i - end - - ## - # Fetches the raw data for +cache_key+ from +server+. Returns nil on cache - # miss. - - def cache_get(server, cache_key) - socket = server.socket - socket.write "get #{cache_key}\r\n" - keyline = socket.gets # "VALUE \r\n" - - if keyline.nil? then - server.close - raise MemCacheError, "lost connection to #{server.host}:#{server.port}" - end - - raise_on_error_response! keyline - return nil if keyline == "END\r\n" - - unless keyline =~ /(\d+)\r/ then - server.close - raise MemCacheError, "unexpected response #{keyline.inspect}" - end - value = socket.read $1.to_i - socket.read 2 # "\r\n" - socket.gets # "END\r\n" - return value - end - - ## - # Fetches +cache_keys+ from +server+ using a multi-get. - - def cache_get_multi(server, cache_keys) - values = {} - socket = server.socket - socket.write "get #{cache_keys}\r\n" - - while keyline = socket.gets do - return values if keyline == "END\r\n" - raise_on_error_response! keyline - - unless keyline =~ /\AVALUE (.+) (.+) (.+)/ then - server.close - raise MemCacheError, "unexpected response #{keyline.inspect}" - end - - key, data_length = $1, $3 - values[$1] = socket.read data_length.to_i - socket.read(2) # "\r\n" - end - - server.close - raise MemCacheError, "lost connection to #{server.host}:#{server.port}" - end - - ## - # Performs a raw incr for +cache_key+ from +server+. Returns nil if not - # found. - - def cache_incr(server, cache_key, amount) - socket = server.socket - socket.write "incr #{cache_key} #{amount}\r\n" - text = socket.gets - raise_on_error_response! text - return nil if text == "NOT_FOUND\r\n" - return text.to_i - end - - ## - # Handles +error+ from +server+. - - def handle_error(server, error) - server.close if server - new_error = MemCacheError.new error.message - new_error.set_backtrace error.backtrace - raise new_error - end - - ## - # Performs setup for making a request with +key+ from memcached. Returns - # the server to fetch the key from and the complete key to use. - - def request_setup(key) - raise MemCacheError, 'No active servers' unless active? - cache_key = make_cache_key key - server = get_server_for_key cache_key - raise MemCacheError, 'No connection to server' if server.socket.nil? - return server, cache_key - end - - def threadsafe_cache_decr(server, cache_key, amount) # :nodoc: - @mutex.lock - cache_decr server, cache_key, amount - ensure - @mutex.unlock - end - - def threadsafe_cache_get(server, cache_key) # :nodoc: - @mutex.lock - cache_get server, cache_key - ensure - @mutex.unlock - end - - def threadsafe_cache_get_multi(socket, cache_keys) # :nodoc: - @mutex.lock - cache_get_multi socket, cache_keys - ensure - @mutex.unlock - end - - def threadsafe_cache_incr(server, cache_key, amount) # :nodoc: - @mutex.lock - cache_incr server, cache_key, amount - ensure - @mutex.unlock - end - - def raise_on_error_response!(response) - if response =~ /\A(?:CLIENT_|SERVER_)?ERROR (.*)/ - raise MemCacheError, $1.strip - end - end - - - ## - # This class represents a memcached server instance. - - class Server - - ## - # The amount of time to wait to establish a connection with a memcached - # server. If a connection cannot be established within this time limit, - # the server will be marked as down. - - CONNECT_TIMEOUT = 0.25 - - ## - # The amount of time to wait before attempting to re-establish a - # connection with a server that is marked dead. - - RETRY_DELAY = 30.0 - - ## - # The host the memcached server is running on. - - attr_reader :host - - ## - # The port the memcached server is listening on. - - attr_reader :port - - ## - # The weight given to the server. - - attr_reader :weight - - ## - # The time of next retry if the connection is dead. - - attr_reader :retry - - ## - # A text status string describing the state of the server. - - attr_reader :status - - ## - # Create a new MemCache::Server object for the memcached instance - # listening on the given host and port, weighted by the given weight. - - def initialize(memcache, host, port = DEFAULT_PORT, weight = DEFAULT_WEIGHT) - raise ArgumentError, "No host specified" if host.nil? or host.empty? - raise ArgumentError, "No port specified" if port.nil? or port.to_i.zero? - - @memcache = memcache - @host = host - @port = port.to_i - @weight = weight.to_i - - @multithread = @memcache.multithread - @mutex = Mutex.new - - @sock = nil - @retry = nil - @status = 'NOT CONNECTED' - end - - ## - # Return a string representation of the server object. - - def inspect - "" % [@host, @port, @weight, @status] - end - - ## - # Check whether the server connection is alive. This will cause the - # socket to attempt to connect if it isn't already connected and or if - # the server was previously marked as down and the retry time has - # been exceeded. - - def alive? - !!socket - end - - ## - # Try to connect to the memcached server targeted by this object. - # Returns the connected socket object on success or nil on failure. - - def socket - @mutex.lock if @multithread - return @sock if @sock and not @sock.closed? - - @sock = nil - - # If the host was dead, don't retry for a while. - return if @retry and @retry > Time.now - - # Attempt to connect if not already connected. - begin - @sock = timeout CONNECT_TIMEOUT do - TCPSocket.new @host, @port - end - if Socket.constants.include? 'TCP_NODELAY' then - @sock.setsockopt Socket::IPPROTO_TCP, Socket::TCP_NODELAY, 1 - end - @retry = nil - @status = 'CONNECTED' - rescue SocketError, SystemCallError, IOError, Timeout::Error => err - mark_dead err.message - end - - return @sock - ensure - @mutex.unlock if @multithread - end - - ## - # Close the connection to the memcached server targeted by this - # object. The server is not considered dead. - - def close - @mutex.lock if @multithread - @sock.close if @sock && !@sock.closed? - @sock = nil - @retry = nil - @status = "NOT CONNECTED" - ensure - @mutex.unlock if @multithread - end - - private - - ## - # Mark the server as dead and close its socket. - - def mark_dead(reason = "Unknown error") - @sock.close if @sock && !@sock.closed? - @sock = nil - @retry = Time.now + RETRY_DELAY - - @status = sprintf "DEAD: %s, will retry at %s", reason, @retry - end - end - - ## - # Base MemCache exception class. - - class MemCacheError < RuntimeError; end - -end - diff --git a/activesupport/lib/active_support/vendor/memcache-client-1.5.1/memcache.rb b/activesupport/lib/active_support/vendor/memcache-client-1.5.1/memcache.rb new file mode 100644 index 0000000..3011320 --- /dev/null +++ b/activesupport/lib/active_support/vendor/memcache-client-1.5.1/memcache.rb @@ -0,0 +1,849 @@ +# All original code copyright 2005, 2006, 2007 Bob Cottrell, Eric Hodel, +# The Robot Co-op. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# 3. Neither the names of the authors nor the names of their contributors +# may be used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS +# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, +# OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT +# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +require 'socket' +require 'thread' +require 'timeout' +require 'rubygems' + +class String + + ## + # Uses the ITU-T polynomial in the CRC32 algorithm. + + def crc32_ITU_T + n = length + r = 0xFFFFFFFF + + n.times do |i| + r ^= self[i] + 8.times do + if (r & 1) != 0 then + r = (r>>1) ^ 0xEDB88320 + else + r >>= 1 + end + end + end + + r ^ 0xFFFFFFFF + end + +end + +## +# A Ruby client library for memcached. +# +# This is intended to provide access to basic memcached functionality. It +# does not attempt to be complete implementation of the entire API, but it is +# approaching a complete implementation. + +class MemCache + + ## + # The version of MemCache you are using. + + VERSION = '1.5.0' + + ## + # Default options for the cache object. + + DEFAULT_OPTIONS = { + :namespace => nil, + :readonly => false, + :multithread => false, + } + + ## + # Default memcached port. + + DEFAULT_PORT = 11211 + + ## + # Default memcached server weight. + + DEFAULT_WEIGHT = 1 + + ## + # The amount of time to wait for a response from a memcached server. If a + # response is not completed within this time, the connection to the server + # will be closed and an error will be raised. + + attr_accessor :request_timeout + + ## + # The namespace for this instance + + attr_reader :namespace + + ## + # The multithread setting for this instance + + attr_reader :multithread + + ## + # The servers this client talks to. Play at your own peril. + + attr_reader :servers + + ## + # Accepts a list of +servers+ and a list of +opts+. +servers+ may be + # omitted. See +servers=+ for acceptable server list arguments. + # + # Valid options for +opts+ are: + # + # [:namespace] Prepends this value to all keys added or retrieved. + # [:readonly] Raises an exception on cache writes when true. + # [:multithread] Wraps cache access in a Mutex for thread safety. + # + # Other options are ignored. + + def initialize(*args) + servers = [] + opts = {} + + case args.length + when 0 then # NOP + when 1 then + arg = args.shift + case arg + when Hash then opts = arg + when Array then servers = arg + when String then servers = [arg] + else raise ArgumentError, 'first argument must be Array, Hash or String' + end + when 2 then + servers, opts = args + else + raise ArgumentError, "wrong number of arguments (#{args.length} for 2)" + end + + opts = DEFAULT_OPTIONS.merge opts + @namespace = opts[:namespace] + @readonly = opts[:readonly] + @multithread = opts[:multithread] + @mutex = Mutex.new if @multithread + @buckets = [] + self.servers = servers + end + + ## + # Returns a string representation of the cache object. + + def inspect + "" % + [@servers.length, @buckets.length, @namespace, @readonly] + end + + ## + # Returns whether there is at least one active server for the object. + + def active? + not @servers.empty? + end + + ## + # Returns whether or not the cache object was created read only. + + def readonly? + @readonly + end + + ## + # Set the servers that the requests will be distributed between. Entries + # can be either strings of the form "hostname:port" or + # "hostname:port:weight" or MemCache::Server objects. + + def servers=(servers) + # Create the server objects. + @servers = servers.collect do |server| + case server + when String + host, port, weight = server.split ':', 3 + port ||= DEFAULT_PORT + weight ||= DEFAULT_WEIGHT + Server.new self, host, port, weight + when Server + if server.memcache.multithread != @multithread then + raise ArgumentError, "can't mix threaded and non-threaded servers" + end + server + else + raise TypeError, "cannot convert #{server.class} into MemCache::Server" + end + end + + # Create an array of server buckets for weight selection of servers. + @buckets = [] + @servers.each do |server| + server.weight.times { @buckets.push(server) } + end + end + + ## + # Decrements the value for +key+ by +amount+ and returns the new value. + # +key+ must already exist. If +key+ is not an integer, it is assumed to be + # 0. +key+ can not be decremented below 0. + + def decr(key, amount = 1) + server, cache_key = request_setup key + + if @multithread then + threadsafe_cache_decr server, cache_key, amount + else + cache_decr server, cache_key, amount + end + rescue TypeError, SocketError, SystemCallError, IOError => err + handle_error server, err + end + + ## + # Retrieves +key+ from memcache. If +raw+ is false, the value will be + # unmarshalled. + + def get(key, raw = false) + server, cache_key = request_setup key + + value = if @multithread then + threadsafe_cache_get server, cache_key + else + cache_get server, cache_key + end + + return nil if value.nil? + + value = Marshal.load value unless raw + + return value + rescue TypeError, SocketError, SystemCallError, IOError => err + handle_error server, err + end + + ## + # Retrieves multiple values from memcached in parallel, if possible. + # + # The memcached protocol supports the ability to retrieve multiple + # keys in a single request. Pass in an array of keys to this method + # and it will: + # + # 1. map the key to the appropriate memcached server + # 2. send a single request to each server that has one or more key values + # + # Returns a hash of values. + # + # cache["a"] = 1 + # cache["b"] = 2 + # cache.get_multi "a", "b" # => { "a" => 1, "b" => 2 } + + def get_multi(*keys) + raise MemCacheError, 'No active servers' unless active? + + keys.flatten! + key_count = keys.length + cache_keys = {} + server_keys = Hash.new { |h,k| h[k] = [] } + + # map keys to servers + keys.each do |key| + server, cache_key = request_setup key + cache_keys[cache_key] = key + server_keys[server] << cache_key + end + + results = {} + + server_keys.each do |server, keys_for_server| + keys_for_server = keys_for_server.join ' ' + values = if @multithread then + threadsafe_cache_get_multi server, keys_for_server + else + cache_get_multi server, keys_for_server + end + values.each do |key, value| + results[cache_keys[key]] = Marshal.load value + end + end + + return results + rescue TypeError, SocketError, SystemCallError, IOError => err + handle_error server, err + end + + ## + # Increments the value for +key+ by +amount+ and retruns the new value. + # +key+ must already exist. If +key+ is not an integer, it is assumed to be + # 0. + + def incr(key, amount = 1) + server, cache_key = request_setup key + + if @multithread then + threadsafe_cache_incr server, cache_key, amount + else + cache_incr server, cache_key, amount + end + rescue TypeError, SocketError, SystemCallError, IOError => err + handle_error server, err + end + + ## + # Add +key+ to the cache with value +value+ that expires in +expiry+ + # seconds. If +raw+ is true, +value+ will not be Marshalled. + # + # Warning: Readers should not call this method in the event of a cache miss; + # see MemCache#add. + + def set(key, value, expiry = 0, raw = false) + raise MemCacheError, "Update of readonly cache" if @readonly + server, cache_key = request_setup key + socket = server.socket + + value = Marshal.dump value unless raw + command = "set #{cache_key} 0 #{expiry} #{value.size}\r\n#{value}\r\n" + + begin + @mutex.lock if @multithread + socket.write command + result = socket.gets + raise_on_error_response! result + result + rescue SocketError, SystemCallError, IOError => err + server.close + raise MemCacheError, err.message + ensure + @mutex.unlock if @multithread + end + end + + ## + # Add +key+ to the cache with value +value+ that expires in +expiry+ + # seconds, but only if +key+ does not already exist in the cache. + # If +raw+ is true, +value+ will not be Marshalled. + # + # Readers should call this method in the event of a cache miss, not + # MemCache#set or MemCache#[]=. + + def add(key, value, expiry = 0, raw = false) + raise MemCacheError, "Update of readonly cache" if @readonly + server, cache_key = request_setup key + socket = server.socket + + value = Marshal.dump value unless raw + command = "add #{cache_key} 0 #{expiry} #{value.size}\r\n#{value}\r\n" + + begin + @mutex.lock if @multithread + socket.write command + result = socket.gets + raise_on_error_response! result + result + rescue SocketError, SystemCallError, IOError => err + server.close + raise MemCacheError, err.message + ensure + @mutex.unlock if @multithread + end + end + + ## + # Removes +key+ from the cache in +expiry+ seconds. + + def delete(key, expiry = 0) + @mutex.lock if @multithread + + raise MemCacheError, "No active servers" unless active? + cache_key = make_cache_key key + server = get_server_for_key cache_key + + sock = server.socket + raise MemCacheError, "No connection to server" if sock.nil? + + begin + sock.write "delete #{cache_key} #{expiry}\r\n" + result = sock.gets + raise_on_error_response! result + result + rescue SocketError, SystemCallError, IOError => err + server.close + raise MemCacheError, err.message + end + ensure + @mutex.unlock if @multithread + end + + ## + # Flush the cache from all memcache servers. + + def flush_all + raise MemCacheError, 'No active servers' unless active? + raise MemCacheError, "Update of readonly cache" if @readonly + begin + @mutex.lock if @multithread + @servers.each do |server| + begin + sock = server.socket + raise MemCacheError, "No connection to server" if sock.nil? + sock.write "flush_all\r\n" + result = sock.gets + raise_on_error_response! result + result + rescue SocketError, SystemCallError, IOError => err + server.close + raise MemCacheError, err.message + end + end + ensure + @mutex.unlock if @multithread + end + end + + ## + # Reset the connection to all memcache servers. This should be called if + # there is a problem with a cache lookup that might have left the connection + # in a corrupted state. + + def reset + @servers.each { |server| server.close } + end + + ## + # Returns statistics for each memcached server. An explanation of the + # statistics can be found in the memcached docs: + # + # http://code.sixapart.com/svn/memcached/trunk/server/doc/protocol.txt + # + # Example: + # + # >> pp CACHE.stats + # {"localhost:11211"=> + # {"bytes"=>4718, + # "pid"=>20188, + # "connection_structures"=>4, + # "time"=>1162278121, + # "pointer_size"=>32, + # "limit_maxbytes"=>67108864, + # "cmd_get"=>14532, + # "version"=>"1.2.0", + # "bytes_written"=>432583, + # "cmd_set"=>32, + # "get_misses"=>0, + # "total_connections"=>19, + # "curr_connections"=>3, + # "curr_items"=>4, + # "uptime"=>1557, + # "get_hits"=>14532, + # "total_items"=>32, + # "rusage_system"=>0.313952, + # "rusage_user"=>0.119981, + # "bytes_read"=>190619}} + # => nil + + def stats + raise MemCacheError, "No active servers" unless active? + server_stats = {} + + @servers.each do |server| + sock = server.socket + raise MemCacheError, "No connection to server" if sock.nil? + + value = nil + begin + sock.write "stats\r\n" + stats = {} + while line = sock.gets do + raise_on_error_response! line + break if line == "END\r\n" + if line =~ /\ASTAT ([\w]+) ([\w\.\:]+)/ then + name, value = $1, $2 + stats[name] = case name + when 'version' + value + when 'rusage_user', 'rusage_system' then + seconds, microseconds = value.split(/:/, 2) + microseconds ||= 0 + Float(seconds) + (Float(microseconds) / 1_000_000) + else + if value =~ /\A\d+\Z/ then + value.to_i + else + value + end + end + end + end + server_stats["#{server.host}:#{server.port}"] = stats + rescue SocketError, SystemCallError, IOError => err + server.close + raise MemCacheError, err.message + end + end + + server_stats + end + + ## + # Shortcut to get a value from the cache. + + alias [] get + + ## + # Shortcut to save a value in the cache. This method does not set an + # expiration on the entry. Use set to specify an explicit expiry. + + def []=(key, value) + set key, value + end + + protected + + ## + # Create a key for the cache, incorporating the namespace qualifier if + # requested. + + def make_cache_key(key) + if namespace.nil? then + key + else + "#{@namespace}:#{key}" + end + end + + ## + # Pick a server to handle the request based on a hash of the key. + + def get_server_for_key(key) + raise ArgumentError, "illegal character in key #{key.inspect}" if + key =~ /\s/ + raise ArgumentError, "key too long #{key.inspect}" if key.length > 250 + raise MemCacheError, "No servers available" if @servers.empty? + return @servers.first if @servers.length == 1 + + hkey = hash_for key + + 20.times do |try| + server = @buckets[hkey % @buckets.nitems] + return server if server.alive? + hkey += hash_for "#{try}#{key}" + end + + raise MemCacheError, "No servers available" + end + + ## + # Returns an interoperable hash value for +key+. (I think, docs are + # sketchy for down servers). + + def hash_for(key) + (key.crc32_ITU_T >> 16) & 0x7fff + end + + ## + # Performs a raw decr for +cache_key+ from +server+. Returns nil if not + # found. + + def cache_decr(server, cache_key, amount) + socket = server.socket + socket.write "decr #{cache_key} #{amount}\r\n" + text = socket.gets + raise_on_error_response! text + return nil if text == "NOT_FOUND\r\n" + return text.to_i + end + + ## + # Fetches the raw data for +cache_key+ from +server+. Returns nil on cache + # miss. + + def cache_get(server, cache_key) + socket = server.socket + socket.write "get #{cache_key}\r\n" + keyline = socket.gets # "VALUE \r\n" + + if keyline.nil? then + server.close + raise MemCacheError, "lost connection to #{server.host}:#{server.port}" + end + + raise_on_error_response! keyline + return nil if keyline == "END\r\n" + + unless keyline =~ /(\d+)\r/ then + server.close + raise MemCacheError, "unexpected response #{keyline.inspect}" + end + value = socket.read $1.to_i + socket.read 2 # "\r\n" + socket.gets # "END\r\n" + return value + end + + ## + # Fetches +cache_keys+ from +server+ using a multi-get. + + def cache_get_multi(server, cache_keys) + values = {} + socket = server.socket + socket.write "get #{cache_keys}\r\n" + + while keyline = socket.gets do + return values if keyline == "END\r\n" + raise_on_error_response! keyline + + unless keyline =~ /\AVALUE (.+) (.+) (.+)/ then + server.close + raise MemCacheError, "unexpected response #{keyline.inspect}" + end + + key, data_length = $1, $3 + values[$1] = socket.read data_length.to_i + socket.read(2) # "\r\n" + end + + server.close + raise MemCacheError, "lost connection to #{server.host}:#{server.port}" + end + + ## + # Performs a raw incr for +cache_key+ from +server+. Returns nil if not + # found. + + def cache_incr(server, cache_key, amount) + socket = server.socket + socket.write "incr #{cache_key} #{amount}\r\n" + text = socket.gets + raise_on_error_response! text + return nil if text == "NOT_FOUND\r\n" + return text.to_i + end + + ## + # Handles +error+ from +server+. + + def handle_error(server, error) + server.close if server + new_error = MemCacheError.new error.message + new_error.set_backtrace error.backtrace + raise new_error + end + + ## + # Performs setup for making a request with +key+ from memcached. Returns + # the server to fetch the key from and the complete key to use. + + def request_setup(key) + raise MemCacheError, 'No active servers' unless active? + cache_key = make_cache_key key + server = get_server_for_key cache_key + raise MemCacheError, 'No connection to server' if server.socket.nil? + return server, cache_key + end + + def threadsafe_cache_decr(server, cache_key, amount) # :nodoc: + @mutex.lock + cache_decr server, cache_key, amount + ensure + @mutex.unlock + end + + def threadsafe_cache_get(server, cache_key) # :nodoc: + @mutex.lock + cache_get server, cache_key + ensure + @mutex.unlock + end + + def threadsafe_cache_get_multi(socket, cache_keys) # :nodoc: + @mutex.lock + cache_get_multi socket, cache_keys + ensure + @mutex.unlock + end + + def threadsafe_cache_incr(server, cache_key, amount) # :nodoc: + @mutex.lock + cache_incr server, cache_key, amount + ensure + @mutex.unlock + end + + def raise_on_error_response!(response) + if response =~ /\A(?:CLIENT_|SERVER_)?ERROR (.*)/ + raise MemCacheError, $1.strip + end + end + + + ## + # This class represents a memcached server instance. + + class Server + + ## + # The amount of time to wait to establish a connection with a memcached + # server. If a connection cannot be established within this time limit, + # the server will be marked as down. + + CONNECT_TIMEOUT = 0.25 + + ## + # The amount of time to wait before attempting to re-establish a + # connection with a server that is marked dead. + + RETRY_DELAY = 30.0 + + ## + # The host the memcached server is running on. + + attr_reader :host + + ## + # The port the memcached server is listening on. + + attr_reader :port + + ## + # The weight given to the server. + + attr_reader :weight + + ## + # The time of next retry if the connection is dead. + + attr_reader :retry + + ## + # A text status string describing the state of the server. + + attr_reader :status + + ## + # Create a new MemCache::Server object for the memcached instance + # listening on the given host and port, weighted by the given weight. + + def initialize(memcache, host, port = DEFAULT_PORT, weight = DEFAULT_WEIGHT) + raise ArgumentError, "No host specified" if host.nil? or host.empty? + raise ArgumentError, "No port specified" if port.nil? or port.to_i.zero? + + @memcache = memcache + @host = host + @port = port.to_i + @weight = weight.to_i + + @multithread = @memcache.multithread + @mutex = Mutex.new + + @sock = nil + @retry = nil + @status = 'NOT CONNECTED' + end + + ## + # Return a string representation of the server object. + + def inspect + "" % [@host, @port, @weight, @status] + end + + ## + # Check whether the server connection is alive. This will cause the + # socket to attempt to connect if it isn't already connected and or if + # the server was previously marked as down and the retry time has + # been exceeded. + + def alive? + !!socket + end + + ## + # Try to connect to the memcached server targeted by this object. + # Returns the connected socket object on success or nil on failure. + + def socket + @mutex.lock if @multithread + return @sock if @sock and not @sock.closed? + + @sock = nil + + # If the host was dead, don't retry for a while. + return if @retry and @retry > Time.now + + # Attempt to connect if not already connected. + begin + @sock = timeout CONNECT_TIMEOUT do + TCPSocket.new @host, @port + end + if Socket.constants.include? 'TCP_NODELAY' then + @sock.setsockopt Socket::IPPROTO_TCP, Socket::TCP_NODELAY, 1 + end + @retry = nil + @status = 'CONNECTED' + rescue SocketError, SystemCallError, IOError, Timeout::Error => err + mark_dead err.message + end + + return @sock + ensure + @mutex.unlock if @multithread + end + + ## + # Close the connection to the memcached server targeted by this + # object. The server is not considered dead. + + def close + @mutex.lock if @multithread + @sock.close if @sock && !@sock.closed? + @sock = nil + @retry = nil + @status = "NOT CONNECTED" + ensure + @mutex.unlock if @multithread + end + + private + + ## + # Mark the server as dead and close its socket. + + def mark_dead(reason = "Unknown error") + @sock.close if @sock && !@sock.closed? + @sock = nil + @retry = Time.now + RETRY_DELAY + + @status = sprintf "DEAD: %s, will retry at %s", reason, @retry + end + end + + ## + # Base MemCache exception class. + + class MemCacheError < RuntimeError; end + +end + diff --git a/activesupport/test/caching_test.rb b/activesupport/test/caching_test.rb index cc371b3..0ef5f7d 100644 --- a/activesupport/test/caching_test.rb +++ b/activesupport/test/caching_test.rb @@ -160,6 +160,12 @@ uses_memcached 'memcached backed store' do @cache.read('foo').gsub!(/.*/, 'baz') assert_equal 'bar', @cache.read('foo') end + + def test_write_should_return_true_on_success + result = @cache.write('foo', 'bar') + assert_equal 'bar', @cache.read('foo') # make sure 'foo' was written + assert result + end end class CompressedMemCacheStore < Test::Unit::TestCase -- 1.5.4.5